Scientific journal
Scientific Review. Technical science
ISSN 2500-0799
ПИ №ФС77-57440

Personal portfolio

ADJUSTMENT TO THE CALCULATION OF GEOMETRIC PARAMETERS OF MECHANISMS WITH CSRE ON THE RADIUS OF THE INNER RING RACEWAY

Merko M.A. 1 Mesnyankin M.V. 1 Kolotov A.V. 1 Kaiser Y.F. 1 Lysyannikov A.V. 1
1 Siberian Federal University
The analysis of the status of the problem. It is shown that for mechanisms with a closed system of rolling elements (CSRE) with diameters of equal size of determining the nominal values of geometrical parameters for the initial conditions when all of the original parameters are constant and take a value greater than zero may not have a solution. Proposed directions of exceptions such a situation. Are composed of the estimated models and derived formulas for the calculation of the nominal values of geometrical parameters mechanisms with CSRE with diameters equal Velychne and amendments. An algorithm for adjustment to the calculation of the nominal values of geometrical parameters for any kind of symmetric structural mechanisms with CSRE with diameters of equal size by entering amendments in the calculation of the radius of the raceways of the inner ring. The results obtained have passed approbation at the international scientific-practical conference (project Sworld). Software is developed in the form of a software complex «Eccentric», which is registered in the Register of the computer programs of the Federal service for intellectual property of Russia (ROSPATENT).