Scientific journal
Scientific Review. Technical science
ISSN 2500-0799
ПИ №ФС77-57440

INFLUENCE OF ADJUSTMENT OF THE DRIVE ON OPERATION OF THE REGULATOR OF BRAKE FORCES

Smirnov D.N. 1 Kirillov A.G. 1 Nuzhdin R.V. 1
1 Vladimir State University of a Name of Alexander Grigoryevich and Nikolay GrigoryevichStoletovykh
In presented article influence of adjustment of the drive on operation of the regulator of brake forces (VAZ-2108-351205211) of front-wheel cars VAZ is considered. Drive correctly adjusted by manufacturer, in use is exposed to the vibration loadings leading to change of a point of fastening of the drive. For research the regulator of brake forces and its mechanical drive which don’t have practices were taken. At the stand output parameters – pressure of brake fluid created on exhaust outlets of the regulator of brake forces were removed, at different provisions of a point of fastening of the drive and two modes the loadings imitating the equipped and full weight of the car. On the basis of the obtained data performance data of the regulator of brake forces were constructed. By results of the analysis conclusions were drawn on influence of provision of a point of fastening of the drive of the regulator of brake forces on its working capacity. For confirmation of the obtained laboratory data, mechanical drives of the regulator of brake forces of operated cars VAZ were investigated. In the analysis of the obtained data the limit operating time of elements of fastening of the mechanical drive of the regulator of brake forces on the basis of which recommendations about technical influence at service are formulated was defined.