Scientific journal
Scientific Review. Technical science
ISSN 2500-0799
ПИ №ФС77-57440

Personal portfolio

INFIUENCE OF DESING FEATURES OF THE CONE CLASSIFIER ON INSTANTANEOUS ANGULAR SPEEDS

Vakhnina G.N. 1
1 Voronezh State Academy of Forestry
Physical and mechanical processes of complex treatment of seeds are studied. The dependence of the angular velocity of structurally is settings of the cone classifier, namely the width of the frame, the diameter of the upper sieve, the average diameter of the larger sieve, the distance between the sieves, angular body with sieves. The calculated values are allowed to find out the intensity changes the angular velocity of the motion frame body left and right. According with charting the following results : an increase in the width of the frame classifier leads to a sharp increase in the instantaneous angular velocities in the range of 0,0001 rad/s to 0,3 rad/s, an increase in the average diameter of the larger sieve reduces the instantaneous angular velocities in the range of 0,34 rad/s to 0,002 rad/s. Increasing the angle of the working body, the maximum value is limited by the average position of the horizontal frame member has a direct impact on the instantaneous angular velocity.