Scientific journal
Scientific Review. Technical science
ISSN 2500-0799
ПИ №ФС77-57440

Personal portfolio

IMPROVING THE PROCESS PARAMETERS REGENERATIVE PROCESSES AT STEEL PROCESSING LADLE FURNACE

Gizatulin R.A. 1 Valuev D.V. 1 Serikbol A. 1
1 Yurginskiy Technological Institute (branch) of the federal government’s budget educational institution of higher education “National Research Tomsk Polytechnic University” Yurga
In modern metallurgy considerable attention to reducing the consumption of reductants and dopants through the development of rational methods for their introduction into steel while improving its quality by reducing the concentration of harmful impurities, as well as increasing the through utilization of the alloying element . One way of solving this problem is to increase the extraction of the alloying element of slag due to intensification of the processes of recovery in the processing of melts in modern ladle furnace equipped with different systems for mixing metal and slag. An assessment of possible development of regenerative processes in the processing of metal and slag melts in the ladle to ladle furnace under intensive stirring bath inert gas. Industrial received data confirming ability to reduce the concentration of iron and manganese oxides in the slag and stabilization of manganese and silicon metal.