Scientific journal
Scientific Review. Technical science
ISSN 2500-0799
ПИ №ФС77-57440

Personal portfolio

RESEARCH OF GRINDING PROCESS WITH IMPORTED COOLANT ON PERFORMANCE PARTS

Vasenko N.P. 1 Golovnya Y.P. 1
1 Volzhskiy Polytechnic Institute (filial) VolgGTU
The analysis of the results of investigation of the influence of the grinding process using imported coolant on the performance of parts. A comparative analysis of the two coolants HESSOL COOL 410 concentration of 5% and 402 AVANTIN concentration of 4%. Tests were conducted on “Volzhsky Bearing Plant” on the machine in the machine SwaAGL 125/5RS using abrasive tools of the type: 600х20х305 25А 16 CM1 K. Workpiece: 2007114.01 - outer diameter. Individual tank volume of 80 liters was cleaned, washed with 1% solution of soda ash and sodium filled first coolant HESSOL COOL 410 concentration of 5% and then 402 AVANTIN concentration of 4%. HESSOL COOL 410 - cutting fluid, which protects parts from corrosion in-process period. Without cooling properties acquires wetting properties, especially under severe processing conditions. AVANTIN 402 - Water-soluble cutting fluid. Free from mineral oils, water soluble concentrate coolant with good corrosion properties. Due to special additives AVANTIN 402 successfully used for machining of cast and steel billets and cold-forming threads.