Issue №1 in 2014

Engineering
FABRICATION AND ANALYSIS DRESSES LAYOUTS Al zubeidi Ali Najim Abdullah, Kuzmichev V.E.	37-37
THE INFLUENCE OF DESIGN PARAMETERS ON THE SHAPE OF THE IRAQI WOMEN’S DRESSES Al zubeidi Ali Najim Abdullah, Kuzmichev V.E.	37-37
PARAMETERIZATION OFTHREE-DIMENSIONALSHAPESOF IRAQIWOMEN’S DRESSES Al Zubeidi A.N., Kuzmichev V.E.	37-38
UWB ANTENNAS DESIGN BASED ON OPTIMIZATION ALGORITHMS Abdrakhmanova G.I.	38-38
USE OF REGRESSION MODEL FOR SELF-ORGANIZATION OF SOCIAL ECONOMIC SYSTEM OF INDUSTRIAL ENTERPRISES OF TRADE Abdullaev U.A.	38-39
REGRESSION ANALYSIS OFCORRELATIONBETWEEN CORRECTION CUTTING PATH AND MODES OF WIRE EDM Ablyaz T.R., Alikin E.S., Plusnina S.S., Fursinova E.R., Vasiljeva A.A.	39-39
SPEED CONTROL SYSTEM FOR THREE-MASS RADIO TELESCOPE USING MODAL CONTROL AND MRAC Abraheem A.A.	39-40
PARALLEL GLOBAL ALIGNMENT ALGORITHM WITH THE OPTIMAL USE OF MEMORY Abu-Khalil Z.M., Morylev R.I., Steinberg B.Y.	40-40
APPLICATION OF COMPUTER SYSTEMS AUTOMATION AND DEVELOPMENT OF NEW TECHNOLOGIES ENGINEERING PRODUCTION Avilov A.V., Kaminskaya J.O., Trusova D.S.	40-41
EFFECT OF VENEER MODIFICTION WITH ELASTOMERS ON STRUCTURL RELIABILITY OF ADHESIVE JOINTS Ageeva T.S., Levinskiy Y.B.	41-41
TO THE QUESTION OF DEVELOPMENT OF INFORMATION SYSTEM OF RENDERING STATE SERVICES IN ELECTRONIC FORM BY BODIES SOCIAL PROTECTION OF THE POPULATION OF THE REPUBLIC OF MORDOVIA Akamova N.V., Golyaeva N.V., Meltsaeva O.A.	41-42
YOUTH DEVELOPMENT OF MOTIVATION TO EMPLOYMENTSCIENTIFIC AND TECHNICAL WORK Akatev V.A.	42-42
MULTI AGENT SIMULATION AND SCHEDULING OF LOGISTIC Aksyonov K.A., Nevolina A.L., Aksyonova O.P., Smoliy E.F.	42-43
THE DEVELOPMENT METHOD OF REAL TIME SIMULATION MODELS AND INTEGRATION WITH ENTERPRISE INFORMATION SYSTEM Aksyonov K.A., Spitcina I.A., Sysoletin E.G., Makedonsky A.M., Aksyonova O.P.	43-43
MULTI AGENT SIMULATION AND PROBABILISTIC APPROACH APPLICATION FOR DYNAMIC PORTFOLIO SCHEDULING IN CONSTRUCTION Aksyonov K.A., Wang Kai, Ryzhkova N.G., Aksyonova O.P.	43-44
ANALYSIS OF TEMPERATURE FIELDS IN FREEZING AND MELTING MOIST SOILS Aksenov B.G., Fomina V.V., Lepihin A.S.	44-44
THE ANALYSIS OF GRAPHICAL NOTATIOS FOR SIMULATION OF ENTERPRISE BUSINESS PROCESSES Aksyonova O.P., Aksyonov K.A., Antonova A.S., Smoliy E.F.	45-45
EIKOMORPHOLOGY. THE ONTOLOGIZATION AND ANALYSIS OF STRUCTURES SPECIES OF HOMEOSTATIC NETWORKS Albegov E.V., Butenko D.V., Butenko L.N.	45-46
IMPLEMENTATION OF A RADIALLY INHOMOGENEOUS DIELECTRIC AND CONSTRUCTION OF THE APERTURE ANTENNAS ON ITS BASIS Alexandrin A.M., Gafarov E.R., Lemberg K.V., Panko V.S., Polenga S.V., Ryazantsev R.O., Salomatov Y.P.	46-46
APPLICATION OF THE PROGRAM DEFORM 3D FOR CALCULATION OF STRUCTURAL AND TEMPERATURE FIELDS AND STRESSEDLY-DEFORMED CONDITION, WHICH FORMING DURING HEAT TREATMENT, IN A SOCKET BLANK FROM 20H1MFA STEEL Al Katawy A. Adwan, Al Katawy A. Adwan, Belikov S.V., Musikhin S.A., Solyanik I.A., Sergeeva K.I.	46-47
INCREASE OF INTERFERENCE IMMUNITY OF NARROW-BAND CHANNELS OF THE RADIO SERVICE ON THE BASIS OF APPLICATION OF SIGNALS WITH INTRAIMPULSE FREQUENCY MODULATION Ananjev A.V., Bezuglov D.A., Juchnov V.I.	47-48
INFORMATION SYSTEMFORSMALL BUSINESSESBASED ON CLOUD TECHNOLOGIES Anashkin R.V., Kiryanov A.A., Sirotkin V.Y.	48-48
ALGORITHM FOR DISTRIBUTED DATA STORAGE SOFTWARE SOLUTIONS FOR AUTOMATION OF SMALL AND MEDIUM ENTERPRISES IN CLOUD Anashkin R.V., Totmelina N.L., Kiryanov A.A., Sirotkin V.Y.	48-48
PROCESSING INFORMATION ABOUT USERS IN THE TRANSLATION MANAGEMENT SOFTWARE PACKAGE Anashkin R.V., Kiryanov A.A., Siroykin Y.V.	49-49
FEATURES OF INTEGRATION OF AUTOMATED TRANSLATION IN CM SERVICES TO MANAGE THE LOCALIZATION Anashkin R.V., Benevolenskiy S.B., Kiryanoff A.A.	49-50
OPTIMIZATION OF TRANSFORMERS DIFFERENTIAL PROTECTION SETTINGS WITH ITS ADEQUATE MATHEMATICAL MODELS Andreev M.V., Borovikov Y.S.	50-50
ARCHITECTURE OF THE HIGH PERFORMANCE PARALLEL SIGNAL PROCESSING DEVICES Andreev V.S., Butusov D.N., Krasilnikov A.V.	50-51
CREATION OF NEURAL NETWORKS TO IDENTIFY THE THERMOPHYSICAL PROPERTIES OF WATER AND STEAM Andreev V.V., Orekhova E.E., Abramov A.A.	51-52
EFFECTIVENESS OF DELTA TRANSFORMATION AT MODELING SECOND ORDER ELEMENTS Andreev V.S., Butusov D.N., Karimov T.I., Lipkin S.M., Sotnin M.I.	52-52
COMPARATIVE ANALYSIS OF MODERN HIGH LEVEL SYNTHESIS TOOLS FOR FPGA Andreev A.E., Maloletkov V.A., Obolonin M. A., Frolov G.O., Сhernoyarov D.A.	52-52
NEW TECHNOLOGIES OF THE CONSTRUCTION OF UNDERGROUND STRUCTURES IN FRACTURED ROCK MASSIFS USING BLASTING OPERATIONS Andriyevskiy A.Р., Zuyev A.Е.	52-53
THE METHOD OF DETERMINATION OF BLAST AND DEEP-HOLE CHARGES BLASTING PARAMETERS ALLOWING TO EXCLUDE SUPERFLUOUS DRILLING AND MINIMIZE THE OVERSIZE YIELD Andriyevskiy A.Р., Zuyev A.Е.	53-53
THE DEVELOPMENT OF ALGORITHMS FOR THE SUBSYSTEM EMERGENCY PREVENTION MANAGEMENT SYSTEM LEACHING ZINC Antipov K.V., Khastcaev B.D.	54-54
ORGANIZATION OF SELECTION OF COMPONENTS TECHNICAL SYSTEMS AT AN ACCEPTABLE LEVEL EXPERT COMPETENCE Antonov M.Y.	54-54
MONITORING PROCESS AUTOMATION OF DAIRY ENTERPRISE BASED ON PARAMETERS RESEARCH OF CATTLE TIME SERIES Antonov L.V., Varlamov A.D.	55-55
ANALYSIS OF SIMULATION SYSTEMS ON THE EXAMPLE OF TECHNOLOGY AND LOGISTICS MODEL DEVELOPMENT Antonova A.S., Aksyonov K.A., Klebanov B.I., Кiseleva M.V., Bykov E.A.	55-56
CLASSIFICATION OF METHODS FOR PREDICTING BEHAVIOR Artemenko M.V., Babkov A.S.	56-56
MODULAR POWER-SUPPLY SYSTEM OF MAGNETRON GENERATOR FROM AN ONBOARD NETWORK OF THE VEHICLE Artyukhov I.I., Zemtsov A.I., Dolzhikova A.S.	56-57
CLEANING MACHINE FOR REPAIR AND MAINTENANCE OF PIPELINES. SELECTION GUIDE TYPE PROPULSOR Artyushkin A.V., Makarov V.S., Molev Y.I., Shapkin V.A.	57-57
DYNAMIC MODEL OF POWER DISTRIBUTION BETWEEN COMPENSATED CURRENT INVERTER Astapovich Y.M., Mirgorodskaya E.E., Mityashin N.P., Maksimova N.N.	57-58
CONSTRUCTION OF THE TRANSFER FUNCTIONS OF THE AUTONOMOUS INVERTERS Astapovich Y.M., Radionova M.V., Mityashin N.P.	58-58
AUTOMATIC LOAD DISTRIBUTION BETWEEN PARALLEL WORKING UNITS Astapovich Y.M., Mityashin N.P., Bilyukov R.V., Kalistratov N.A.	58-59
METHODS OF EVALUATION OF TECHNO-ECONOMIC EFFICIENCY OF TRUCKS Astafyeva O.M., Braslovez P.А., Budalin S.V., Nekrasov D.N., Sidorov B.А.	59-59
GENETIC ALGORITHM FOR THE SYNTHESIS OF INTELLIGENT CONTROL SYSTEM Atiencia Villagomez J.M., Diveеv A.I., Zabudsky E.I.	59-60
ON ASSESSMENT OF THE RELIABILITY OF THE SYSTEM FOR MONITORING ENERGY COMPLEX OF COTTAGE SETTLEMENT Atroschenko V.A., Djachenko R.A., Bagdasaryan R.K., Reshetnyak M.G.	60-60
THE QUESTION OF THE ACCURACY OF THE INFORMATION TO PREVENT MITM-ATTAKS IN TRASFER PUBLIC INFORMATION THROUGH OPEN COMMUNICATION Atroshchenko V.A., Rudenko M.V., Dyachenko R.A., Bagdasaryan R.K., ,	61-61
OPTIMAL SOLUTIONS OF NONLINEAR PROBLEMS IN BINARY PROGRAMMING DISTRIBUTED DATABASE WITH A TIME CONTSTANT CHARACTERISTICS Atroschenko V.A., Usatikov S.V., Djachenko R.A., Tishkovskiy D.V.	61-62
TO THE QUESTION OF IMPROVEMENT SYSTEMS OF QUALITY AND NATIONAL STANDARDS Afanasiev A.A, Rybak L.A., Gaponenko E.V., Mamaev Y.A.	62-62
MATHEMATICAL MODELING WORKFLOW OF LOADING MINING MASS WITH LOADING ORGANS WITH RAKING SPROCKETS Afonina N.B.	62-63
THE FIRST SYSTEMATIZED SCIENTIFIC RESEARCH ON THERMAL CRACKING Akhmadova K.K., Idrisova E.U., Movsumzada E.M., Syrkin A.M.	63-63
EXPERT SYSTEM FOR AUTOMATED SELECTION OF MATERIALS, COATINGS AND OTHER PREPARATION TYPES OF MAIN PARTS SURFACE AND AVIATION GAS TURBINE ENGINE ASSEMBLIES Akhmedzanov D.A., Kishalov A.E., Markina K.V., Ignatev O.I.	63-64
DEVELOPMENT OF AN ELECTROTECHNICAL COMPLEX OF SEWAGE TREATMENT FOR THE PURPOSE OF REDUCTION OF CONSUMPTION OF ELECTRIC ENERGY AND AN INTENSIFICATION OF PROCESS OF CLEANING Akhmedova O.O., Soshinov A.G., Bakhtiarov K.N.	64-65
DEVELOPMENT OF THE POWER SUPPLY OF ULTRASONIC PYEZOKERAMICHESKY OF THE RADIATOR Akhmedova O.O.	65-65
STUDY OF TECHNICAL PARAMETERS OF SOIL AND PLANT OPEN-PITS Badmaeva Z.B., Sangadzhieva L.K., Davaeva T.D., Kolesnik S.A.	65-66
RESEARCH OF RELIABILITY SERVICE BRAKING SYSTEM OF THE CAR VAZ-21703 Bazhenov Y.V., Denisov Iv.V., Denisov Il.V.	66-66
THE REMOTE DIMENSIONAL MONITORING OF THE MOVING TRAIN’S WHEELS Baybakov A.N., Kuchinsky K.I., Plotnikov S.V., Sotnikov V.V., Sotnikov V.V., Chugui Y.V.	66-67
SPECTRAL OPTOELECTRONIC QUADRATURE TRANSFORMER OF SIGNALS OF LASER DORLEROVSKY ANEMOMETER Bakakin G.V., Anikin Y.A., Glavniy V.G., Dvoynishnikov S.V., Kabardin I.K., Krotov S.V., Pavlov V.A., Sadbakov O.Y., Chubov A.S.	67-67
QUALITATIVE ANALYSIS OF SCREENING FUNCTIONAL BIOMECHANICAL TESTS ON THE BASIS OF THE REDUCED SAMPLE DATA Bakusov L.M., Nasyrov R.V., Minasov T.B.	67-68
TEMPERING RESISTANCE OF HARDENED CONSTRUCTIONAL LOW CARBON STEELS AFTER COLD RADIAL FORGING Balakhnin A.N.	68-68
MODELLING OF MULTISTAGE HYDROCLONE UNITS IN PRODUCTION OF POTATO STARCH Balakhnin I.A.	69-69
EVALUATION OF ERRORS BY MONTE CARLO METHOD IN MEASURING THE COMPONENTS OF IMPEDANCE Baranov V.A., Danilova A.A., Shumarova S.A.	69-70
STRUCTURAL APPROACH TO INVERSE PROBLEMS OF COMPUTERIZED DIAGNOSTICS IN CARDIOLOGY Baranov V.A., Avdeeva D.K., Penkov P.G, Yuzhakov M.M., Maksimov I.V., BalahonovahM.V., Grigoryev M.G.	70-70
ANALYSIS OF TECHNOLOGICAL PROCESS OF PRODUCTION UREA AS CONTROL OBJECT Baranova N.I.	70-71
INTEGRATED METHODOLOGY OF ESTIMATION OF ACTIVE SAFETY CHARACTERISTICS OF LIGHT COMMERCIAL VEHICLES ON THE BASIS OF SIMULATION AND ROAD TESTS RESULTS Barakhtanov L.V., Sereda P.V., Tumasov A.V., Shashkina K.M.	71-71
THE REASONS FOR THE NEED FOR THE DEVELOPMENT OF AUTOMATIC ENERGY-SAVING MEASURES Basmanov V.G., Poroshin D.A., Ozhegov A.N.	72-72
CALCULATION FIBRE-REINFORCED STRUCTURES SUBJECT TO JOINT EFFECT OF TORSION OF THE BEND Bakhotskiy I.V., Morоzov V.I.	72-72
EXPERIMENTAL INVESTIGATIONS OF FIBRE-REINFORCED CONCRETE ELEMENTS EXPOSED TO BENDING WITH TORSION Bakhotskiy I.V.	73-73
OPTIMAL ALGORITHMS FOR SIGNAL PROCESSING IN AN ADAPTIVE OPTICAL PHASE CONJUGATED INFORMATION TRANSMISSION SYSTEM Bezuglov D.A., Reshetnikova I.V.	73-74
BUILDING A HIGH-PERFORMANCE MEASUREMENT SYSTEMS OF INFORMATION, NAVIGATION AND CONTROL SYSTEMS Bezuglov D.A., Pomortsev P.M., Krasnobabtshev F.F., Disenov A.A., Ananiev V.A.	74-74
RESEARCH RESULTS OF DIRECTION «INFORMATION AND COMMUNICATION SYSTEMS AND TECHNOLOGIES» Belash O.U., Veremyeva O.E., Kivit E.B., Ryzhov N.G.	74-75
INFLUENCE OF THE INTERCRITICAL HEATING TEMPERATURE ON THE FORMATION OF SUBGRAIN STRUCTURE IN LOW-ALLOY STEELS Belikov S.V., Sergeeva K.I., Karabanalov M.S., Popov A.A., Al-Katawy A. Adwan, Al-Katawy A. Adwan	75-76
IMPROVEMENT OF MANAGEMENT INSTRUCTIONS TRANSMISSION RELIABILITY WITH AID OF MULTITHESHOLD DECODERS FOR SELF-ORTHOGONAL CODES Belitskij A.M., Ovechkin G.V., Shevlyakov D.A.	76-76
ABOUT THE METHOD OF THE SPATIAL AND TEMPORARY STATISTICAL ANALYSIS OF FIRES Belozerov V.V., Oleynikov S.N.	76-77
GEOMETRICAL SYNTHESIS OF THE SPACE CAM MECHANISM OF MECHATRONIC UNITE FOR AUXILIARY BLOOD CIRCULATION SYSTEMS Belayev L.V., Shevchenko A.P., Zhdanov A.V.	77-77
THE FEATURES OF MODERN APPROACHES TO DESIGN OF PULSATIVE TYPE SYSTEMS OF ARTIFICIAL HEART AND AUXILIARY BLOOD CIRCULATION WITH CALS- TECHNOLOGIES APPLICATION Belayev L.V., Zhdanov A.V.	77-78
HEMODYNAMIC ASPECTS OF DESIGN OF THE SYSTEMS OF AUXILIARY BLOOD CIRCULATION AND ARTIFICIAL HEART ON BASE MECHATRONIC MODULES Belayev L.V., Ivanchenko A.B., Zhdanov A.V.	78-78
SYSTEM APPROACH TO THE DEVELOPMENT OF THE MONITORING AND EVALUATION SYSTEM OF UNIVERSITY EDUCATION QUALITY Belyakova E.A., Khorosheva E.R.	78-79
PROVIDING ON-LINE CONTROL LOCALIZATION INFORMATION RESOURCES WITH OPEN SOURCE SOFTWARE AND THE ABILITY TO INTEGRATE WITH THE MAIN OPEN-SOURCE CONTENT Benevolenskiy S.B., Kiryanoff A.A., Anashkin R.V.	79-79
SOFTWARE INFORMATION SYSTEMS EVALUATION OF COMPETENCE OF STUDENTS IT SPECIALTIES Berestneva O.G., Shkatova G.I., Budaeva N.D.	79-80
ANALYSIS OF SOCIAL GRAPHS WITH A METHOD OF ESTIMATING DEGREE OF FUZZY GRAPH ISOMORPHISM USING FUZZY CLIQUES Bershtein L.S.	80-80
RESEARCH OF WEAR RESISTANCE OF STRELOCHNYKH CORES OF TRANSFERS FROM THE HIGH-MANGANIC STEEL 110G13L, SUBJECTED TO HIGH-TEMPERATURE GAS-STATIC PROCESSING Blurtsyan R.S., Blurtsyan D.R., Blurtsyan I.R.	80-81
HYPER-PRODUCTIVE PROCESSING BY SURFACE-PLASTIC DEFORMATION METHOD Bobrovskiy N.M., Melnikov P.A., Bobrovskiy I.N., Ezhelev A.V.	81-81
DESIGN FEATURES OF MANIPULATORS WITH THE CONTROLLED BEND Bogdanov D.R., Darintsev O.V.	81-82
PROBLEMS OF RELIABILITY FIXED OFFSHORE OIL AND GAS PLATFORMS Bogdanov Y.A.	82-82
ТASKS PLANNING IN THE DISTRIBUTED HETEROGENEOUS INFORMATION SYSTEMS Bogdanova O.V., Stupina A.A., Korpacheva L.N., Yuronen E.A., Fedorova A.V., Ezhemanskaya S.N.	82-83
THE USE OF CAD SYSTEMS AND IT TECHNOLOGIES WITHIN THE SYLLABUS OF DESCRIPTIVE GEOMETRY AND ENGINEERING GRAPHICS Blinov A.V., Bozhko J.V., Korobov V.M., Sherbakov V.V.	83-83
MECHANICAL PROPERTIES AND MICROSTRUCTURE OF POLYMER MATRIX COMPOSITES BASED ON UHMWPE Boykov А.А., Ivanov S.М., Volkov А.Е., Terekhin P.N., Kuznetsov S.A., Tcherdyntsev V.V., Gorshenkov М.V.	83-84
EXPERIMENTAL JUSTIFICATION OF PREVENTIVE ACTION OF THE IODATED FOOD COMPOSITE Bolshakova L.S., Litvinova E.V., Zhmurina N.D., Burtseva E.I.	84-84
INTELLECTUALIZATION OF CHANGE ACTIVITIES UNIVERSITY BASED ON MONITORING - RATING INFORMATION Bondarev Y.P., Lvovich Y.E.	85-85
CHANGE MANAGEMENT THE RATING OF SUBJECT AND OBJECT EDUCATIONAL SYSTEM BASED PROCESS INTELLECTUALIZATION Bondarev Y.P., Lvovich Y.E.	85-86
USING THE METHOD OF CALCULATION COLOR DIFFERENCESTO ASSESS CHANGES PAINT SHEEPSKIN SEMI-FINISHED PRODUCTS Borisova Е.N., Koytova J.Y.	86-86
MODERN APPROACH TO THE ISSUE OF WASTEWATER TREATMENT Bukalova N.P., Tihonova N.A.	86-87
INTELLECTUAL TOOLS OF SUPPORT OF DECISION-MAKING IN PROBLEMS OF MANAGEMENT OF THE PROFESSIONAL STANDARD OF STUDENTS Bukalova A.Y., Kharitonov V.A.	87-87
WORKING FEED RATE OF THE ACTIVE MOUNTED BRUSH CUTTER Bulavintseva A.D., Mazurkin P.M.	87-88
CALCULATION OF WORKING FEED RATE OF THE ACTIVE MOUNTED BRUSH CUTTER DEPENDING ON PARAMETERS OF THE CUT-OFF BUSH Bulavintseva A.D., Mazurkin P.M.	88-88
DETERMINATION OFSTRUCTURAL-PROCESS PARAMETERS FEEDERDISKCHIPPERS Burlakov A.S., Fokin S.V.	88-89
THE PROBLEM OF DEVELOPMENT ASSESSMENT PROCEDURES AND IMPROVEMENT OF PROFESSIONAL SKILL OF DRIVERS OF VEHICLES Burmistrov V.A., Skrypnikov A.V.	89-89
THE METHOD OF LINEAR CONTOUR FORMATION ON AERIAL PHOTOGRAPHS OF RURAL AREA Burmistrov A.V., Salnikov I.I.	89-89
ADJUSTMENTS TO THE LIST OF WORKS OF MAINTENANCE VEHICLES Burmistrov V.A.	90-90
A MEASURE OF INFORMATION SIMILARITY FOR SEMISTRUCTURED INFORMATION ANALYSIS Butakova M.A., Klimanskaya E.V., Yants V.I.	90-91
MODEL-BASED DESIGN OF TRACKED ROBOT CHASSIS CONTROL SYSTEM Butusov D.N., Krasilnikov A.V., Raytsin S.B., Mironchenko E.A., Klunnikova Y.V.	91-91
APPROACH TO DETERMINING THE SIZE OF MULTIMEDIA APPLICATIONS DATA BUFFER BASED ON VARIABLE CONNECTION BAND WIDTH Bykov D.V., Zinov P.V., Averin E.V.	91-92
STUDY ATTRITION DRY OAK TIMBER IN DRYINQ VACUUM IMPULSE WAY Bykova E.L., Trakalo Y.I.	92-92
RESULTS OF TESTING DEVICES FOR UTILIZATION OF NON-FOOD OF THE CROP Byshov N.V., Bachurin A.N., Bogdanchikov I.Y.	92-93
VEVLET TRANSFORMATION FOR RECOGNITION OF THE DISTORTED PHONEMES Vavilova О.S., Pilkin A.N.	93-93
EFFECTS ON ENVIRONMENTAL QUALITY PARAMETERS VOLTAGE LIGHTING SYSTEMS Vagin G.Y., Masleeva O.V., Pachurin G.V., Terentev P.V.	93-94
RESEARCH OF SETTLEMENT HUMIDITY AND MECHANICAL CHARACTERISTICS OF CLAY SOIL OF CLOTHES OF FOREST ROADS ON MATERIALS OF RESEARCHES IN MARITUREKSK THE AREA OF THE REPUBLIC OF MARI EL Weinstein V.M., Nekhoroshkov P.A., Weinstein E.V., Miroshin A.N.	94-94
STUDY OF CHANGES COEFFICIENT OF VARIATION CLAY SOIL MOISTURE ON MATERIALS OF GEOLOGICAL SURVEY IN THE REPUBLIC OF MARI EL FOR CLOTHES LOGGING ROADS Weinstein V.M., Nekhoroshkov P.A., Weinstein E.V., Miroshin A.N.	95-95
RESEARCH OF GRINDING PROCESS WITH IMPORTED COOLANT ON PERFORMANCE PARTS Vasenko N.P., Golovnya Y.P.	95-96
MODELLING OF PICTURES OF ELECTROMAGNETIC FIELDS ON THE BASIS OF TRANSIENTS Vasileva O.V.	96-96
DIGITAL PROCESSING OF OSCILLOGRAMS BY RESULTS OF DIAGNOSTICS OF THE POWER TRANSFORMER IN THE ENVIRONMENT OF LAB VIEW Vasileva O.V., Lavrinovich A.V.	96-97
MODELLING OF THE ELECTROMAGNETIC DRIVE OF THE VACUUM SWITCH Vasileva O.V.	97-97
CREATION OF SUBJECT DOMAINS THEMATIC STRUCTURES Vasina E.N., Kozlova I.V.	97-98
MATHEMATICAL MODEL OF SECONDARY LINEAR ACCELERANION SIEVED PARTICLES (WITH AN UPPER POSITION OF THE HORIZONTAL FRAME MEMBER) Vakhnin G.N.	98-98
ANALYTICAL MODEL OF A SPEED MODE TAPER CLASSIFIERGN Vakhnina G.N., Knyazev A.V., Losev S.S.	98-99
CALCULATION OF GEO INDUCED CURRENTS IN HIGH-VOLTAGE POWER LINES OF ELECTRICITY SUPPLY SYSTEMS AT GEOMAGNETIC STORMS Vakhnina V.V., Kuznetsov V.A., Kretov D.A., Kozub A.A.	99-99
TO THE QUESTION OF CLARIFICATION MATHEMATICAL MODELS OF MECHANICAL SYSTEM BY THE METHOD OF DYNAMICAL REGULARIZATION Vdovin A.Y., Kutsubina N.V., Rubleva S.S., Sannikov A.A.	99-100
KRIVOSHIPNOYE THE SHIPPING DEVICE OF AIRCRAFTS WITH AUTOMATIC ADDITIONAL LOAD Velikanov A.V., Zatcepin V.V.	100-101
COMBINING IMAGES FROM SENSORS OF VARIOUS FREQUENCY RANGES Vetrov A.N., Osipova A.A., Gakhzar M.A., Artukhin I.Y.	101-101
CONCEPTION OF COMPETENCY-BASED BUSINESS-GAME STUDIO Vikentyeva O.L., Deryabin A.I., Shestakova L.V.	101-102
THE BRIEF REVIEW OF SOME EXISTING METHODS FOR DETERMINING VEHICLE SPEED THE COLLISION Vinogradova T.V., Kulida J.V.	102-102
ABOUT THE NATURE OF THE COURSE OF ACCIDENTS WITH CORE MATERIALS MELTING OF FAST REACTOR WITH SODIUM COOLANT Vlasichev G.N.	102-103
THE ANALYSIS OF INFLUENCE OF EXTERNAL FACTORS ON DIELECTRIC PERMEABILITY OF WORKING OIL Vlasov Y.A.	103-103
TO THE QUESTION OF TRANSPORT SERVISE QUALITY DETERMINING IN THE DEVELOPMENT PROCESS OF TERRITORY PLANNING DOCUMENTS Vlasov D.N., Lobacheva I.N.	103-104
ORGANIZATION OF PRELIMINARY CONTROL OF UNITS OF CAREER DUMP TRUCKS METHOD OF THE OSCILLATORY CONTOUR Vlasov Y.A., Udler E.I., Tischenko N.T., Zemlyanoy S.A., Tankov R.Y.	104-104
THE METOLOGY OF DEVELOPMENT OF THE TRANSIT&TRANSPORT TERMINAL SYSTEM ON THE TERRITORY OF THE URBAN AGGLOMERATION CORE (ON THE EXAMPLE OF MOSCOW) Vlasov D.N.	104-105
IMPROVING THE EFFICIENCY OF FREIGHT TRANSPORT Volkov V.S., Butorin T.А., Filatov G.M.	105-105
STABILIZATION OF THE ROUTE OF URBAN PASSENGER TRANSPORT BY FAILURE SITUATIONS Volkov V.S., Surhaev G.M., Magomedov V.K.	105-106
THE ANALYSIS OF EFFICIENCY OF SPACE RADAR MONITORING OF TECHNOGENIC DEFORMATIONS OF THE TERRESTRIAL SURFACE IN TERRITORIES OF OIL AND GAS FIELDS Volkov V.I., Vershinina Y.V.	106-106
EFFECT OF SURFACE ANGLE VIBRATING SCREEN ON EFFICIENT WORKFLOW Lyptsev S.A., Volkov E.B.	107-107
RESEARCH OF ANTI-FRICTION PROPERTIES OF OIL ADDITIVES FOR TECHNICAL SYSTEMS OF TRANSPORT UNDER THE INFLUENCE OF AN ELECTRIC FIELD Voronin S.V., Grunyk I.S.	107-108
THE MATHEMATICAL APPARATUS AND ALGORITHM TO PERFORM CALCULATIONS OF THE THERMAL CONTROL ROOM AIR-HEATING UNITS USING THE SOFTWARE PACKAGE “LOCAIRHEAT” Voronkov D.S.	108-108
THE VALIDATION OF THE MATHEMATICAL MODEL SOFTWARE PACKAGE “LOCAIRHEAT” FOR THE CALCULATION OF THE THERMAL CONTROL SYSTEM OF AIR-HEATING UNITS Voronkov D.S.	108-109
A METHOD OF DISTRIBUTED PRESSURE SENSORS DATA PROCESSING FOR ESTIMATION OF THE ALTITUDE OF A MOBILE UNIT Voronov R.V., Volkov A.S., Volkov A.S., Reginya S.A., Reginya S.A., Fedorov A. A., Fedorov A. A., Moschevikin A.P., Moschevikin A.P.	109-109
RATIONING OF LOSSES OF ORE AT REGISTRATION OF THE TRENCH BOTTOM Vokhmin S.A., Trebush Y.P., Kurchin G.S., Mayorov E.S.	109-110
LASER TECHNOLOGY IMPROVEMENT RESISTANCE ROLLING ROLLS Gavrilov G.N., Kostromin S.V., Kalinin A.B., Peiganovich V.N., Ermakov D.U.	110-110
THE SOFTWARE PACKAGE FOR THE IMPLEMENTATION OF A BI-DIRECTIONAL DATA EXCHANGE Gavrilova M.V., Zhiganov A.N., Starovaitova E.N.	110-111
ECONOMICAL PROVISION, CHARACTERIZED BY THE COMPUTATIONAL BURDEN Gavrilova M.V., Zaripova E.F., Oschepkov D.E.	111-112
ANALYSIS OF TWO-PHASE OPERATION OF INFORMATION-MEASURING SYSTEM BASED ON THE SENSOR WITH MOVED MAGNETIC FIELD Gavrina O.V., Shatova Y.A.	112-112
ON THE PHOTOSENSITIVITYDISTRIBUTION OVER THE INGAASSB/GASB EPITAXIAL STRUCTURES AREA Gavrushko V.V., Grigoriev A.N.	112-112
RESEARCH OF DRYING OF THE PAINT COATING FORMED BY THE PENTAPHTOL VARNISH ON WOOD AT THE AEROIONIZATION Gazeev M.V., Tihonova E.V.	113-113
EFFECT OF INTERMEDIATE PLASTIC DEFORMATION ON MECHANICAL PROPERTIES OF AN AL-CU-MG-AG ALLOY AFTER AGEING Gazizov M.R., Zuiko I.S.	113-114
METHODS TO IMPROVE DESIGN CAPACITIVE IGNITION SYSTEMS Gizatullin F.А., Gazizov D.R.	114-114
EVALUATION OF STRESS-STRAIN OF METALLLA BILLETS MADE TURN-BASED MOLDING METHOD OF MATHEMATICAL MODELING Galkin V.V., Cheburkov A.S., Pachurin G.V.	114-115
DECISION SUPPORT IN CUSTOMER RELATIONSHIP MANAGEMENT BASED ON INTEGRATED CUSTOMER SERVICE CENTRE Galyamov A.F., Tarkhov S.V.	115-115
HYDRODYNAMIC PRESSURE SIMULATION, INITIATE EMITTERS IN ULTRASONIC BARKING Gasparyan G.D.	115-116
ULTRASONIC BARKING EXPERIMENTATIONS METHODS Gasparyan G.D.	116-116
ULTRASONIC TIMBER BARKING SIMULATION Gasparyan G.D.	116-117
CAVITATION EFFECTS SIMULATION IN ULTRASONIC TIMBER BARKING Gasparyan G.D.	117-117
THE INFLUENCE OF MAGNETIC BEARINGS TECHNICAL STATE ON EXTERNAL MAGNETIC FIELD PARAMETERS Gerasin A.A., Ismagilov F.R., Khairullin I.H., Pashali D.Y., Boykova O.A., Vavilov V.E.	117-118
INFORMATION TECHNOLOGIES OF BIOSYSTEM INDEXES TIME CHANGE MAIN TENDENCIES DETERMINATION Gerget O.M., Mileshin A.A.	118-118
DATABASE «TECHNOLOGICAL EQUIPMENT OF FOUNDRIES» Gilmanshina T.R., Mamina L.I., Baranov V.N., Lytkina S.I., Partyko E.V.	118-119
ON AN APPROACHE TO DESIGN OF AUTOMATED OPERATIONAL MANAGEMENT SYSTEM OF FOUNDRY PRODUCTION Gindullina T.K., Kamalova L.Z., Demchenko M.S.	119-119
MODELING OF DIGITAL CMOS CIRCUITS USING TERNARY DECISIONS DIAGRAMS Glebov A.L., Mindeeva A.A., Petrosyan V.S., Gevorgyan A.M.	119-120
EXPERIMENTAL STUDIES TAPE PILE FOUNDATION WITH INTERMEDIATE SAND CUSHION Glusnkov V.E., Khabibulin S.Y.	120-120
INCREASING RESOURCE OF THE COMPONENTS OF PLOWS ON THE BASIS OF APPLICATION DIP-TRANSFER SURFACING Golubina S.A.	120-121
MODELING OF PROCESS PACKET DATA TRANSITION Gorbachenko I.M.	121-121
INTELLIGENT TUTORING SYSTEM “KLIOS” BASED ON THE LINGUISTIC PROCESSOR FOR STUDING RUSSIAN AS A FOREIGN LANGUAGE Gorisev S.A., Koynov A.V., Kuzemchik V.D., Lisinin S.V., Mikhaleva E.V., Mishunin O.B., Savinov A.P., Terekhin D.E., Firstov D.I., Cherkashin A.Y.	121-122
FINE-DISPERSED ARBOREAL COMPOSITE MATERIALS ON THE POWDER BINDING Gorohovskij A.G., Chernyshev D.O., Chernyshev O.N.	122-122
THEORETICAL RESEARCHES OF FORMATION OF THE WOOD COMPOSITE MATERIAL ON THE BASIS OF THE POWDER BINDING Gorohovskij A.G., Chernyshev D.O., Shishkina E.E.	123-123
STATEMENT OF THE PROBLEM COMPUTER DESIGN ARC CHAMBER IN A SEALED ENCLOSURE INSTALLATION OF CIRCUIT BREAKERS Gorshkov Y.E.	123-123
COMBINATORIAL-GEOMETRIC CALCULATION METHODS AND REPORTING GRAPH VARIANTS OF CONFIGURATION TREE OF NETWORK DOMAINS Gorshkov K.A., Nikitin O.R., Rau T.F., Ali Abbas Mokchsin Ali, Rau V.G.	124-124
DEVELOPMENT OF CONCEPTUAL AUTOMATED MEDICAL INFORMATION SYSTEM BY METHOD OF FUNCTIONAL-STRUCTURED ANALYSIS Gotlib B.M., Vakalyuk A.A., Basmanov S.N., Ustyugova A.A.	124-125
DIE STEEL MECHANICAL PROPERTIES Gotlib B.M., Sergeev R.F., Vakalyuk A.A.	125-125
ACCELERATED RELIABILITY TESTING CYLINDER HEADS TRACTOR DIESEL ENGINES Gots A.N., Prygunov M.P., Frantsuzov I.V.	125-126
DEVELOPMENT OF MATHEMATICAL MODELS FOR THE CALCULATION OF THE TEMPERATURE FIELDS OF CYLINDER HEAD TRACTOR DIESEL Gots A. N., Ivanchenko A. B., Prygunov M. P., Frantsuzov I. V.	126-126
DETERMINING THE STIFFNESS OF THE AIRFOIL SPRINGS RAILWAY IN PROCESSING MULTIPLE TIP Grechuhin A.N., Gladyshkin A.O., Razumov M.S.	126-127
LOCALIZATION OF A LOCAL POWER FLUX INCREASE SOURCE IN THE NUCLEAR REACTOR USING THE SIGNAL OF THE UNDER-CORE NEUTRON DETECTORS Grinko S.O.	127-127
ORACLE ACADEMY COURSES FOR COMPUTER SCIENCE UNIVERSITY SPECIALTIES Grinyak V.M., Mozharovsky I.S., Sankaev A.A.	127-128
PROGRAM ENGINEERING METHODS AND E-LEARNING TECHNOLOGIES FOR COURSES TYPE OF «PROGRAMMING LANGUAGES» Grinyak V.M., Slugina N.L.	128-128
ABOUT THE DEVELOPMENT OF VENTILATION SYSTEMS AND INDIVIDUAL PROTECTION EQUIPMENT IN PRODUCTION OF MATERIAL MINING EQUIPMENT Grishagin V.M., Mutina A.N.	129-129
MATHEMATIC MODEL AND NUMERICAL TECHNIQUE FOR INVESTIGATION DIFFUSION AND HEAT CONDUCTION PHENOMENA Gubarev S.V., Berg D.B., Dobrjak P.V.	129-129
COMPLEX RULES STOP CONTINUOUS MONITORING Gusev A.L.	130-130
BIOACCUMULATION COMPONENTS OF THE METALLURGICAL SLUDGE IN THE BEET PLANTS Gusev A.A., Shuklinov A.V., Akimovа O.A., Zakharova O.V., Vasjukova I.A.	130-130
DETERMINATION OF MECHANICAL PROPERTIES OF HETEROGENEOUS SAMPLES Gusev S.V.	130-131
INVESTIGATION OF METALLURGICAL SLUDGE IN FLAX PLANTS TO MOLECULAR-CELL LEVEL Gusev A.A., Shuklinov A.V., Akimovа O.A., Zakharova O.V., Vasjukova I.A.	131-131
INSPECTION STOPPING RULES FOR CONVENTIONAL INSPECTION AND INSPECTION WITH MEMORY Gusev A.L.	131-132
BUILDING A MODEL OF SPATIAL INFORMATION PROCESSING ON THE BASIS OF FUZZY LOGICS METHODS Davletbakova Z.L.	132-132
MODEL OF NEGENTROPY MANAGEMENT QUALITY OF EDUCATIONAL PROGRAMS OF UNIVERSITY Danilov A.N.	132-133
METHODS OF JOINERY TIMBER CONSTRUCTION WITH THE CLAW DOWELS Danilov E.V., Chernykh A.G.,	133-133
CRITERIA DEPENDING ON DYNAMIC PARAMETERS IN THE CONDITIONS OF MECHANICAL BRAKING MINE HOISTING PLANTS Dvinin L.A., Dvinina L.B., Lyptsev S.A.	133-134
PRECISION DIAGNOSTICS OF THREE-DIMENSIONAL GEOMETRY OF TURBINE BLADES FOR HYDROPOWER Dvoynishnikov S.V., Kulikov D.V., Meledin V.G., Pavlov V.A., Pribaturin N.A.	134-134
COMPARATIVE ANALYSIS OF HIDDEN MARKOV MODELS STRUCTURES USED IN THE PROBLEM OF THE IDENTIFICATION HUMAN BY FACE IMAGE Dvoynoy I.R., Salnikov I.I.	134-135
TO THE PROBLEM OF COMPARING THE RESEARCH METHODS FOR STUDYING THE WELDING FUMES RECEIVED IN THE PROCESS OF MINING EQUIPMENT PRODUCTION Grishagin V.M., Demenkova L.G.	135-135
TECHNIQUE OF REPRESENTATION OF THE CONDITION OF THE CONVERTING COMPLEX IN REAL TIME Denisov A.V., Trekov A.G., Mityashin N.P.	135-136
METHOD OF CALCULATION PAYBACK PERIOD AT INNOVATION SYSTEM OF THE COMPANY VEHICLE MAINTENANCE Denisov I.V., Smirnov A.A.	136-136
APPLICATION OF WEBOMETRIC METHODS FOR THE STUDY OF THE WEB SPACE OF KARELIAN STATE PEDAGOGICAL ACADEMY Derbeneva O.Y., Pechnikov A.A.	137-137
DISTRIBUTION OF TECHNICAL OBJECTS IN THE UNIFORM SET BY MEANS OF FUZZY SETS Derbisher E.V.	137-138
THE METHOD OF CALCULATION OF HIGHER HARMONIC COMPONENTS IN THE POINT OF CONNECTION OF CONSUMERS TO DISTRIBUTION NETWORKS OF POWER SYSTEMS Derendyaeva L.V., Lochtina A.S., Sboeva V.S.	138-138
STANDARD EQUIPMENT INTENSIFY GRINDING OF STONE Derkach I.S.	138-139
CONTROL SYSTEM PROBLEM SOLUTION BY VARIATIONAL GENETIC PROGRAMMING METHOD Diveev A.I., Ibadulla S.I., Sofronova E.A.	139-139
GRAMMATICAL EVOLUTION AND NETWORK OPERATOR METHODS FOR SYNTHESIS OF THE CONTROL SYSTEM FOR A DYNAMIC OBJECT Diveev A.I., Kazaryan D.E.	139-140
ALGORITHMS AND METHODS OF THE METHODOLOGY OF CREATING ONTOLOGY OF THE GIVEN KNOWLEDGE DOMAIN Didyk T.G., Rykov V.I., Sharonova J.V.	140-140
ACTIVE LAUNCH AIRCRAFT WITH RAMJET ENGINE FORMED ON THE BASIS OF FLIGHT TRANSFORMATION Dickshev A.I., Kostyanoy E.M.	140-141
THE METHODICAL APPARATUS FOR REGISTRATION OF LAUNCHES AND DEFINITIONOF SPATIALLY-TEMPORARY AND POWER PARAMETERS OF MEANS OF AN AEROSPACE ATTACK WICH USE OF GNSS Disenov A.A., Kiryschkin V.V., Cherepanov D.A., Bezuglov D.A.	141-142
OPTIMAL DESIGN SYSTEM FOR FISHING GEARS Dmitrevich G.D., Mikheyev F.A., Fung T.V.	142-142
A MODEL OF CARDBOARD CANVAS FORMATION BY SPRAYING METHOD Dobrynin A.A., Timofeeva L.G.	142-143
USING OF INTELLECTUAL SYSTEMS FOR DIAGNOSTICS OF FAULTS OF GAS TURBINES Dolinina O.N., Antropov P.G., Kuzmin A.K., Shvarts A.Y.	143-143
MODERN MACHINES AND EQUIPMENT FOR FORESTRY IN THE COMBINED COURSE Drapalyuk M.V., Platonov A.A.	143-144
INTELLIGENT DIAGNOSIS OF ELECTROMAGNETIC MECHANISM BASED ON NEURAL NETWORK TECHNOLOGY Dubrov V.I.	144-144
APPLICATION TECHNOLOGY ANOMALY DETECTION IN THE PROBLEM OF DIAGNOSTICS OF THE HIGH SWITCHING EQUIPMENT Dubrov V.I.	144-145
PARAMETER OPTIMIZATION OF THE INTELLIGENCE DIAGNOSTIC SYSTEM OF HIGH-VOLTAGE SWITCHES Dubrov V.I.	145-145
THE METHOD OF TASKS SOLUTION ABOUT OPTIMUM SITING OF PRODUCTION OBJECTS Dulesov A.S., Prutovyh М.А.	145-146
LOGARITHMIC MEASURE OF INFORMATION OF THE CONDITION OF TECHNICAL OBJECT Dulesov A.S., Kabaeva E.V.	146-146
ON THE DEVELOPMENT OF METHODS FOR PREDICTION OF TEMPERATURE IN AREAS OF CAPITAL BUILDINGS Djachenko R.A., Bagdasaryan R.K., Reshetnyak M.G., Rudenko M.V.	146-147
ON THE CONSTRUCTION OF INFORMATION SYSTEM OF SELECTION OF THE OPTIMAL CHARACTERISTICS OF ARTIFICIAL NEURAL NETWORKS FOR FORECASTING PROBLEMS IN THE POWER SECTOR Djachenko R.A.	147-147
QUALIFICATION MIXES BULK MATERIALS BASED ON THEIR DIGITAL IMAGES Dyomin O.V., Smolin D.O., Pershin V.F.	148-148
NEURO-CONTROLLEROF QUADCOPTER CONTROL SYSTEM Evgenov A.A.	148-149
REVIEW OF EXISTING METHODS CALCULATION SPEED OF TWO-VEHICLES Evtukov S.А., Brylev I.S.	149-149
SPEED AS A FACTOR OF INFLUENCE ON ROAD SAFETY Evtyukov S.S., Dobromirov V.N.	149-150
EXPERIMENTAL RESEARCHES OF COMPACTED SNOW Egorov A.L., Merdanov M.Sh., Chernyakov E.N., Chernyakova O.O.	150-150
SUBSTANTIATION OPERATING PARAMETERS SNOWBLOWER WITH SEALING OF WORKING BODIES Egorov A.L., Fedotov V.V., Fedotova E.A.	150-151
KIT OF MACHINES FOR THE CONSTRUCTION OF TEMPORARY WINTER ROADS Egorov A.L., Merdanov M.S., Chernyakov E.N., Chernyakova O.O.	151-151
A MECHANISM OF PROCESS AND TECHNOLOGY OF GAS-PHASE ALUMINUM NITRIDE SYNTHESIS Elagin A.A., Shishkin R.A., Afonin Y.D., Beketov A.R., Baranov M.V.	152-152
GAS-PHASE METHOD FOR PREPARING ALUMINIUM NITRIDE POWDER: A THERMODYNAMIC ANALYSIS Elagin A.A., Shishkin R.A., Beketov A.R., Baranov M.V.	152-153
CONCERNING THE ISSUE OF CALCULATION OF THE COMPRESSED REINFORCED CONCRETE ELEMENTS WITH REGARD TO THE INSTANTANEOUS NONLINEARITY AND NONLINEAR CREEP BEHAVIOUR OF CONCRETE Elistratov V.N.	153-153
CARRYING OUT MATHEMATICAL MODELING OF COMPONENTS THE RAMAN SPECTROGRAMS OF POLYESTER FIBERS WHEN DRAWING NANOPARTICLES OF GOLD ON THEM Emelyanov V. M., Dobrovolskaya T.A., Emelyanov V.V., Orlov E.Y.	153-154
SOME ASPECTS OF GLONASS SYSTEM APPLICATION FOR TRAFFIC SAFETY Emelyanova V.G.	154-154
STUDY PECULIARITIES OF SINTERING CERAMIC TILES ON THE BASIS OF THE MASS OF BURNT FORMING EARTH Eromasov R.G., Nikiforova E.M., Stupko T.V., Dubinin P.S., Vasileva M.N., Simonova N.S.	154-155
LOW ENERGY CONSUMPTION RESOURCE SAVING TECHNOLOGIES OF BINDERS FOR STRUCTURAL CONCRETE Eroshkina N.A., Korovkin М.О., Aksenov S.V.	155-155
METHOD AND EVALUATION OF EFFICIENCY FOR INTELLECTUALIZATION OF CONTROL SYSTEMS DEVELOPMENT FOR COMPLEX INDUSTRIAL-TECHNICAL SYSTEMS Ershov A.A.	155-156
ALGORITHMIC CLASSIFICATION OF FLOAT GLASS SPOT DEFECTS Efimov I.V., Petrov D.Y., Petrov D.Y., Ivaschenko V.A., Ivaschenko V.A., Meshalkin V.P., Meshalkin V.P.	156-156
IDENTIFICATION PROCEDURE-STRUCTURAL SYNTHESIS OF MODELS FOR THE ANALYSIS OF CRITICAL CONDITIONS OF COMPLEX SYSTEMS Zhashkova T.V.	156-157
EFFECT OF PLASTIC DEFORMATION ON MECHANICAL PROPERTIES OF AN AL-CU-MG-AG ALLOY Zhemchuzhnikova D.A., Gazizov M.R., Tagirov D.V.	157-157
INTERACTIVE METHODS IN LABORATORY TRAINING OF STUDENTS IN THE DIRECTION “TECHNOLOGICAL MACHINES AND EQUIOMENT” Zhiltsov A.P.	157-158
IMPROVEMENT OF METHODS OF INFORMATION SHARING HIGH-SPEED WIRELESS INFORMATION NETWORKS WITH THE USE OF NEW TYPES OF ENSEMBLES OF DISCRETE SEQUENCES Zhuk A.P., Petrenko V.I., Kuzminov U.V., Zhuk E.P., Luganskaja L.A.	158-158
LUCUBRATIONS ANALYSIS FOR CONTAINING MNEMONIC QUOTES Zabaykin A.V., Idrisov R.I.	158-159
EMULATION OF NETWORK IMPAIRMENTS OF MULTIMEDIA STREAMS IN A WI-FI NETWORK Zabrovskiy A.L., Arikainen A.I., Petrov E.A.	159-159
RESEARCH OF SOUNDPROOFING OF DOUBLE FENCING TO REDUCE NOISE IN WOODWORKING Zavyalov A.Y., Starzhinsky V.N., Sovina S.V.	159-160
NONCONTACT SPEED SENSOR OF ROTORS SWINGING MOVEMENT AND FIELDS OF THE APPLICATION Zagrivniy E.A., Gubar N.S., Poddubniy D.A.	160-160
ON THE DEVELOPMENT OF SPECIALIZED COMPUTER SYSTEMS OF KNOWLEDGE CONTROL Zaozerskaya L.A., Plankova V.A.	160-161
INTEGRATED ASSESSMENT OF INNOVATIVE DEVELOPMENT OF THE REGION ON THE BASIS OF FUZZY SETS Zakharova A.A.	161-161
GRAVITY SEPARATION IN EQUAL TRANSPORT FLOW WITH PERIODIC CROWDED AND FREE SETTLING Zashikhin A.V.	161-162
MATERIAL COMPOSITION AND FLOTATION PROPERTIES OF SANGEEVSKOE ORE DEPOSIT Zashikhin A.V.	162-162
NUMERICAL STUDY OF THE INFLUENCE OF GRAIN SIZE AND LOADING CONDITIONS ON THE DEFORMATION IN POLYCRYSTALLINE ALUMINUM ALLOY Zinovieva O.S., Zinovieva O.S., Romanova V.A.	162-163
STRESSEDLY-DEFORMED CONDITION OF JOINT TRUSS TUBE WITHOUT GUSSET PLATE RESEARCH Zinkova V.A., Solodov N.V.	163-163
DEVELOPMENT OF METHODOLOGY FOR DECISION SUPPORT OPERATIONAL STAFF OF PRIVATE USAGE ON THE BASIS OF THE OPERATIONAL LOAD STATIONS Zolotarev S.A., Sirazetdinova A.D.	163-164
COMPARATIVE ANALYSIS OF MULTI-AGENT MODEL FOR THE TRANSFORMATION RESOURCES Zraenko A.S., Aksenov K.A., Fedotov V.P.	164-164
INVESTIGATION OF THE LAYERED STRUCTURE OF THE METAL-INSULATOR-METAL EDDY CURRENT Zyrianova A.I., Zyrianova A.I., Malikov V.N., Malikov V.N.	165-165
CALCULATION OF CORRECTION DURINGWIRE ELECTRICAL DISCHARGE MACHINING Ivanov V.A., Ablyaz T.R., Morozov E.A.	165-166
THE FORMATION OF STRUCTURE AND PROPERTIES OF THE COPPER CHROME COMPOSITE WIRE BY MIXING AND CONSOLIDATION SHAVINGS COMPONENTS IN THE SOLID PHASE Ivanov E.V., Zagirov N.N., Kovaleva A.A., Anikina V.I.	166-166
THE METHOD OF IDENTIFICATION AND MEASUREMENT OF SPECULATIVE GROWTH THE STOCK MARKET Ivanyuk V.A., Tarasova I.A., Osipova M.K.	166-167
RESOURCE EFFICIENCY ASSESSMENT TECHNIQUE IN FOUNDRY PRODUCTION Ivashutenko A.S., Vidyaev I.G., Martyushev N.V.	167-167
ANALYSIS AND SYNTHESIS OF REASONS LEADING TO REDUCED LIFE OF THE CUTTING TOOL AT CUTTING MATERIALS Ivashchenko A.P.	167-168
CLASSIFICATION AND COMPARISON METHOD FOR TERNARY CMOS LOGIC GATES Ivshin P.A.	168-168
PROBLEMS FINDING THERMAL PROCESSING OF COMPLEX SHAPES OF ALUMINUM ALLOY EDDY CURRENT Ignatov A.V., Ignatov A.V., Laptev A.Y., Laptev A.Y., Salita D.S.	168-169
STRUCTURIZATION AND QUALITY MEASUREMENT OF BANK ITEMS FOR “ELECTRICAL MACHINES” SUBJECT Ignatovich V.M., Muratova E.A.	169-169
METHOD OF DETERMINING THE SOUND OF INCREASING CAPACITY OF CUTTING TOOLS Ignatev A.S.	169-170
ASSESSMENT OF ELASTOPLASTIC DEFORMATION ON THE BASIS OF THE METHOD OF CONVERSION OF PROBABILITY Izvekov Y.A., Kuzina T.G.	170-171
SYNTHESIS OF CARBON NANOTUBE – BASED MODIFIERS COMPOSITE CONCRETE Ilinykh I.A., Mazov I.N., Mazov I.N., Kuznetsov D.V., Yudintseva T.I., Kuskov K.V., Burmistrov I.N.	171-171
MECHANICAL PROPERTIES OF COMPOSITE CONCRETES MODIFIED WITH CARBON NANOTUBES Ilinykh I.A., Burmistrov I.N., Burmistrov I.N., Mazov I.N., Mazov I.N., Kuznetsov D.V., Yudintseva T.I., Kuskov K.V.	171-172
DEVELOPMENT OF MODIFIERS FOR THERMOPLASTIC POLYMERIC MATERIALS BASED ON CARBON NANOTUBES Ilinykh I.A., Burmistrov I.N., Burmistrov I.N., Mazov I.N., Mazov I.N., Kuznetsov D.V., Yudintseva T.I., Yusupov K.U., Shevelev A.A.	172-173
MODELLING OF THE POTENTIAL HOLE FOR SPATIAL RESTRICTION OF SCATTERING OF THE LOADED PARTICLES OF PLASMA IN THE ELECTROMAGNETIC FIELD Isaev Y.N., Vasileva O.V.	173-173
THE MATHEMATICAL MODEL OF TRANSFORMER WHEN ITS DIAGNISIS BY SHORT DURATION PULS TAKES PLACE Isaev Y.N., Kolchanova V.А., Elgina G.A., Lavrynovych A.V.	173-174
DEFINITION OF DEFORMATIONS OF WIRES OF THE WINDING OF THE TRANSFORMER, CAUSED BY CURRENT OF SHORT CIRCUIT Isaev Y.N., Vasileva O.V., Elgina G.A.	174-175
THE SIMULATION OF TRANSFORMER WINDING UNDER THE INFLUINCE OF VOLTAGE PULS BY MATLAB SIMULINK Isaev Y.N., Kolchanova V.А., Elgina G.A.	174-174
THE STUDY OF THE STRESS-STRAIN STATE OF REINFORCED CONCRETE BEAMS BASED ON THE DEFORMAYION MODEL SECTION Isakov I.A.	175-175
CОNCEPTUAL MODEL SPEСIALIZATION BY DEFINITE DESCRIPTIONS USING Ismailova L.Y., Kosikov S.V.	176-176
PROBLEM OF OPTIMAL LOCATION OF WIRELESS NETWORK EQUIPMENT Kasakovtsev L.A., Gudyma M.N., Stupina A.A., Kirillov Y.I.	176-176
ONTOLOGY OF AUTOMATED ART AND TECHNOLOGICAL DESIGN OF WARP-KNITTED FABRIC Kaznacheyeva A.A., Kochetkova O.V., Lomkova E.N., Epov A.A.	177-177
SELECTION OF DESIGN TECHNIQUES AND THEORETICAL CALCULATIONS OF HIGH-TEMPERATURE COMBUSTIONS Kaliy V.A., Belov S.A., Reznichenko A.V.	177-177
DESIGN OF OPERATORS OF PHYSICAL QUANTITIES IN MATLAB Kalmychkov V. A., Kurganskaya L.V., Shestova E.A., Egoshin A.V., Shumkov D.S.	178-178
USE OF THE «FACTOR OF SAFETY» IN THE AUTOMATED CONTROL SYSTEM OF SAFETY IN GAS BOILER Kalugin M.N.	178-179
INFORMATION SYSTEM REGIONAL MUSEUM: STRUCTURE, DEVELOPMENT AND USE OF EXPERIENCE Kanunova E.E.	179-179
USING MULTIPLY-FREE FIR-FILTERS FOR SAMPLE FREQUENCY REDUCE Kaplun D.I., Kanatov I.I., Minenkov D.V.	179-180
DESIGNED SIMULATION OF THE SPACE PLATFORM FOR THE ACCELERATED FLIGHT QUALIFICATION Karaseva M.V., Stupina А.А., Melder М.I.	180-180
CREATION OF THE INNOVATIVE COMPOSITE MATERIAL OF THE SPECIAL PURPOSE ON THE BASIS OF WOOD «DS-1» Karev B.N, Chernyshev D.O., Chernyshev O.N.	180-181
IMPLEMENTATION OF DIGITAL INTEGRATOR WITH DELTA CONVERSION Karimov A.I., Butusov D.N., Platonov S.M., Lavrov S.V., Mandra S.G.	181-181
FUNCTIONING OF PURE FORMALIZABLE MULTICOMPONENT TECHNICAL SYSTEM IN THE CONDITIONS OF UNCERTAINTY Karihmanova A.S., Shcherbatov I.A.	182-182
TO THE QUESTION OF DECREASE IN POWER CONSUMPTION OF TECHNOLOGICAL PROCESSES OF MATERIALS CUTTING Karpov A.V.	182-183
THE CHOICE OF DIESEL GENERATOR›S ELECTRICAL PARAMETERS FOR ELECTRICAL SYSTEMS SUPPLY FIRST CATEGORY OF SPECIAL GROUPS Karyakin A.L., Bulygin D.A.	183-183
MODEL OF PERSPECTIVE HIGH-TEMPERATURE GAS TURBINE PLANT WITH LOW EMISSION OF HAZARDOUS EMISSIONS Kasymov M.K.	183-184
AUTOCLAVED AERATED CONCRETE PHASE COMPOSITION RESEARCH Kaftaeva M.V., Rakhimbaev Sh.M., Pospelova E.A.	184-184
ENERGY SAVING AT PRODUCING AUTOCLAVE-CURED WALL MATERIALS FOR BUILDINGS ENCLOSURES Kaftayeva М.V., Sharapov О.N., Shugayeva М.А., Rakhimbayev I.S.	184-185
BUILDING EXPERIENCE OF THE STRIP FOUNDATIONS COMBINED BY SHALLOW SHELL IN HEAVY GEOTECHNICAL CONDITIONS OF TYUMEN Kim B.G., Pronozin Y.A., Tsygankova M.A., Volosyuk D.V.	185-185
ACTUAL PROBLEMS OF THE RECYCLING OF AUTOMOBILE CATALYSTS Kirichenko A.S.	185-186
GROUP WORK OF USERS IN INFORMATION SYSTEM FOR SMALL BUSINESS BASED ON CLOUD TECHNOLOGY AND ITS PERFORMANCE ANALYSIS Kiryanov A.A., Sirotkin V.Y., Anashkin R.V.	186-186
INFORMATION -TRAINING SYSTEM FOR LEARNING DISTANCE Kiryakova O.V., Lapina L.A., Solopko I.V., Gron D.N., Kapustina S.V.	187-187
MODELINGCROSS-LANGUAGECOMMUNICATIONS MANAGEMENT SYSTEM Kit М.S.	187-187
EXPERIMENTAL CHECK OF EXPERT SYSTEM FUNCTIONALITY FOR AUTOMATED SELECTION OF MATERIALS, COATINGS AND OTHER PREPARATION TYPES OF THE MAIN SURFACE PARTS AND AVIATION GAS TURBINE ENGINE ASSEMBLIES Kishalov A.E., Markina K.V., Ignatev O.I.	188-188
PROBLEMS ABOUT THE SAFETY OF TRAFFIC ACCIDENT OF HA NOI Klepik N.K.1, Nguyen T.A., Dinh T.P.D.	188-188
QUALITY CHARACTERISTICS OF INNOVATIVE ACTIVITY ENTERPRISE STRUCTURES Klochko I.L., Starkova G.P., Malko T.V.	189-189
THE METHOD OF DESIGNING OF FPGA FUNCTIONAL BLOCKS BASED ON MEMRISTORS Kovalev A.V., Malukov S.P., Kalskov A.V.	189-189
PROTEOMIC STUDY OF MEAT, SAUSAGES AND FUNCTIONAL MEAT PRODUCTS Kovaleva M.A., Kovalev L.I., Shishkin S.S., Ivanov A.V., Vostrikova N.L.	190-190
DEVELOPMENT OF AUTOMATED SYSTEM OF AN ACCESS CONTROL BASED ON ANALYSIS OF THE NASOLABIAL MUSCLES DYNAMICS OF THE HUMAN FACE Kovshov E.E., Zavistovskaya T.A.	190-191
INTEGRATED ENVIRONMENT FOR ENGINEERING CALCULATIONS Kozhinov D.G., Krivosheev I.A., Akhmedzyanov D.A., Gorjunov I.M.	191-191
MEASUREMENTS PARAMETERS OF HARMONIOUS SIGNAL IN THE CONDITIONS OF ACTION NOISE AND HINDRANCES BASIS ON THE METHOD OF SIGNAL DECOMPOSITION ON THE OWN NUMBERS Kozlov V.V.	191-192
RESEARCH AND DEVELOPMENT SPEED NEURAL-NETWORK OBSERVER FOR CONTROL SYSTEM OF INDUCTION MOTOR DRIVES Kozlova L.E.	192-192
AVIONICS SOFTWARE TESTING SYSTEM BASED ON DECISION MAKING METHODS Kozyrev V.P., Troitsky A.K.	192-193
METHOD OF JUSTIFYING THE VOLUME OF INVESTMENTS THE PROJECTS IMPLEMENT STANDARD PRODUCTIONS Kokarev А.S., Ptushkin A.I.	193-193
SOME ASPECTS OF A METHOD OF ANALOGIES IN DESIGNING OF INFORMATION-MEASURING SYSTEMS Kolesnikov V.A., Jurov V.M.	193-194
DIAMONDCUTTING TOOLMATERIALSBASED ONIRONPOWDER Kolosova T.M., Sorokin V.K., Kostromin S.V., Belyaev E.A.	194-194
EXPERIMENTAL VALIDATION OF IMPLEMENTATION OF THE WATER-BASED FILM COATING FOR FINISHED DOSAGE FORM OF THE CHOLERA CHEMICAL VACCINE Komissarov A.V., Eremin S.A., Zadokhin S.N., Shulgina I.V., Lobovikova O.A., Vasin Y.G., Klokova O.D., Livanova L.F., Nikiforov A.K.	194-195
PROTECT ROADSIDE AREAS OF EXPOSURE AND VEHICLE EXHAUST NOISE Kondrashova E.V., Skrypnikov A.V.	195-195
MODIFIED SCREENINGS CRUSHING OF CARBONATE ROCKS BASED ARTIFICIAL STONE Kononova O.V., Cherepov V.D.	195-196
3D FORMATION OF THE ROUGHNESS AT VIBROSHOCK HARDENING OF FLOWING CHANNELS OF THE DRIVING WHEEL OF THE COMPRESSOR Kopylov S.Y.	196-196
CRM-SYSTEM IMPLEMENTATION METHODOLOGY IN THE ENTERPRISE Korablyov O.V., Zolotukhina E.B.	197-197
ASSESSMENT OF APPLICATION POSSIBILITY OF ISOTHERMAL QUENCHING FOR INCREASING OF CONSTRUCTIVE STRENGTH OF THICK-WALLED INCREASED RELIABILITY PIPES Kornienko O.Y., Belikov S.V., Sergeeva K.I., Al Katawy A. Adwan, Al Katawy A. Adwan, Ermenzina N.V.	197-197
OPTIMIZATION OF AERODYNAMIC CHARACTERISTICS OF THE WING-SUIT Kornilovich A.V., Kuzmichev V.E.	198-198
ANALYSIS OF METHODS OF THE ASSESSMENT OF THE CONDITION OF DOCUMENT FLOW OF THE ORGANIZATION Korovina L.V.	198-199
THE RESEARCH OF CHANGE IN HARDNESS OF THE PRESS ROLL COATINGS OF POLYURETANE UNDER CHANGES IN TEMPERATURE Korolev A.V., Vorontsov S.V., Sannikov A.A.	199-199
THE RESEARCH OF STRESS STATE OF THE PRESS ROLL COATINGS OF THE PAPERMAKINGMACHINES Korolev A.V., Sannikov A.A.	199-200
DEVELOPMENT OF MODEL OF MANAGEMENT BY TRAINING PROCESS ON THE BASIS OF ITS «TECHNOLOGY OF GARMENTS» Koroleva L.A., Podshivalova A.V., Panyushkina O.V.	200-200
ANALYSIS OF POWER SUPPLY OF VEHICLES ON THE BASIS OF THE ELECTRIC TRACTION KorotkovV.S., LezhnevL.Y., PapkinB.A., ShustrovF.A.	200-201
DEVELOPMENT OF PRODUCING HYDROGEN FUEL FOR INTERNAL COMBUSTION ENGINE AS PART OF THE AUTONOMOUS HYBRID POWER SYSTEMS Korotkov V.S., Zaletov D.V., Podsukhin R.A.	201-201
PRINCIPLES OF OPEN SYSTEMS DEVELOPMENT AND INFORMATION TECHNOLOGY TRAINING Korpacheva L.N., Bogdanova O.V., Stupina A.A., Yuronen E. A., Fedorova A. V., Ezhemanskaya S.N., Mandrichko T.M.	201-202
TECHNICAL CONTROL OF MOBILE MACHINES VIBRATION PARAMETERS Korchuganova M.A., Korchuganova M.A., Syrbakov A.P., Syrbakov A.P.	202-202
MEASURING THE TENSION FORCE REBAR BEAMS IN THE CONTAINMENT NPP UNITS Koryashkin A.S., Matveev A.I.	202-203
INTENSIONAL OPERATORS FOR SPECIALIZATION MODELS OF IMITATING SIMULATORS Kosikov S.V., Ismailova L.Y.	203-203
ESTIMATION OF INFLUENCE ON THE ENVIRONMENT AND ACTIVE MONITORING OF PHYSICAL AND CHEMICAL PARAMETERS IN THE NATURE TECHNICAL SYSTEMS OF RECYCLING OF WASTE PRODUCTS Kostarev S.N., Sereda T.G., Elanceva E.N.	203-204
DEVELOPMENT OF PARAMETRICAL MODEL MANAGEMENTS OF SANITARY LANDFILL MUNICIPAL SOLID WASTE Kostarev S.N.	204-204
MATHEMATICAL MODEL DETECTING LEAKS LOCALIZATION IN BIG-VOLUME GOODS Kostikov E.S., Lobaev A.N., Malygin A.L., Myasnikov V.M.	205-205
FUZZY CONTROL SYSTEM OF THE MOBILE ROBOTMOTION Kostygov A.M., Dadenkov D.A., Kaverin A.A.	205-205
IMPORTANCE OF TRANSPORTATION AND OPTIMIZATION PROCESS FOR RATIONAL DESIGN OFFOREST ROAD NETWORK Kostyaev V.N.	206-206
INVESTIGATION WORK OF VENTURI MODULARCONTACT ELEMENT Kosyrev V.M.	206-207
CREATING AN INFORMATION ANALYSIS SYSTEM FOR ANALYSIS OF THE RESEARCH ENTERPRISE Kotelnikov A.V.	207-207
LOCAL-MIDDLE BENDING OF THE LAMINATED COMPOSITE MATERIALS OF THIN PLATES Kotsyuba I.V., Vetoshkin U.I., Petriaev N.E.	207-208
PRESSURELEACHING–FLOTATIONMETHODPROCESSING CU – PB – ZN CONCENTRATES KochinV.A., Naboitchenko S.S., Lebed A.B., MaltsevG.I.	208-208
OPTIMIZATION TECHNIQUE FREQUENCY AND VOLUME OF SUPPLIES OF FUEL AT FILLING STATIONS SPECIALIZED MACHINES Kravchenko I.N., Miasnikov A.V., Shaibakov R.R.	208-209
PROTOTYPE OF ENVIRONMENT FOR THE IMPLEMENTATION OF THE NETWORKING OF UNIVERSITIES, ENTERPRISES AND INNOVATORS Krevskiy I.G., Glotova T.V., Matukin S.V., Sheremeteva E.G.	209-209
PROTOTYPE OF ENVIRONMENT FOR THE IMPLEMENTATION OF THE NETWORKING OF UNIVERSITIES, ENTERPRISES AND INNOVATORS Krevskiy I.G., Glotova T.V., Matukin S.V., Sheremeteva E.G.	210-210
DESIGN THE SYSTEM FOR SUPPORT THE LIFE CYCLE OF ELECTRONIC EDUCATIONAL RESOURCES Krevskiy I.G., Glotova T.V, Deev M.V.	210-211
ESTIMATION OF LIMIT VALUES OF DEHYDRATION’S LAYER HEIGHT DURING FIELD ENRICHMENT OF PEAT IN HIGH SEASON OF QUARRYING Kremcheev E.A.	211-211
RESEARCH OF THE SEPARATION PROCESS OF LIGHT KVASS ON MEMBRANE MICROFILTRATION PLANT Kretov I.T., Popov E.S., Potapov A.I., Popov D.S.	211-212
DEVELOPMENT OF METHOD FOR IDENTIFICATION OF MATHEMATICAL SIMULATION NETWORK GTE MODEL IN THE SIMULATION SYSTEM DVIGW Krivosheev I.A., Goryunov I.M., Rozhkov K.E., Krivtsov D.A.	212-212
THE PROCESSING MODULE OF LASER REVERSAL DOPPLER MEASURING SYSTEM Krotov S.V., Meledin V.G., Bakakin G.V., Kabardin I.K., Naumov I.V., Rahmanov V.V.	212-213
DEVELOPMENT OF A METHODOLOGY OF CREATING ELV DISMANTLING CATALOGUES Kryaskov V.G., Gagunov S.A., Groshev A.M.	213-213
THE USE OF ACTIVATED CARBONS FOR THE PURIFICATION OF UNCONCENTRATED EXHAUST GASES FROM SULFUR DIOXIDE Ksandrov N.V., Kotova N.N., Ojogina O.R., Kazankova T.N.	213-214
NUMERICAL MODELING THE FREEZING AND THAWING PROCESS OF ROADBED CONSTRACTION ON THE PERMAFROST SOILS Kudriavtcev S.A., Kazharskiy A.V.	214-214
THE IMPROVEMENT METHOD OF OPTIMIZATION SPECIFIC QUANTITY OF METAL CONSTRUCTION Kudryashova A.V., Kuzyutkina A.V., Avilov A.V.	214-215
ANALYSIS OF EFFICIENCY OF POLYMER-MATRIX UHMWPE-BASED COMPOSITES WITH X-RAY FILLERS Kuznetsov S.A., Ivanov S.М., Volkov А.Е., Terekhin P.N., Tcherdyntsev V.V., Boykov А.А.	215-216
PHYTOSTIMULATING EFFECTS OF METALLURGICAL SLUDGE ON THE SUNFLOWER (HELIANTHUS) Kuznetsov D.V., Kondakov S.E., Churylov G.I., Polishchuk S.D., Kolesnikov E.A., Chuprunov K.O., Levina V.V., Leybo D.V.	216-216
DETERMINATION OF OPTIMAL CONCENTRATIONS OF SLUDGE METAL PRODUCTION ON THE VITAL AND MORPHOPHYSIOLOGICAL INDICATORS OF SEEDLINGS OILSEEDS Kondakov S.E., Kuznetsov D.V., Churylov G.I., Churylov D.G., Kolesnikov E.A., Chuprunov K.O., Levina V.V.	216-217
COMPLEX MICROBIOLOGICAL PROCESSING OF ALCOHOL STILLAGE WITH RECEIVING PROTEIN-CONTAINING FODDER PRODUCT Kuznetsov I.N., Ruchai N.S.	217-217
THEORETICAL ASPECTS OF DEVELOPING OF COMPILER FOR LEARNING THE BASICS OF TRANSLATION Kuznetsov M.A., Khorolskiy A.V.	217-218
FILTERING LINK FREQUENCY CHARACTERISTICS OF THE PERSPECTIV RADIO NAVIGATION SYSTEM HARDWARE-SOFTWARE COMPLEX ANALIZIES Kuzmin E.V., Zograf F.G., Veprintsev V.I., Bylkova G.K., Bautochko A.V.	218-218
SIMULATION OF ONE-MACHINE POWER SYSTEM WITH HELP TRANSFER FUNCTIONS IN MATLAB SIMULINK Kuleshova E.O., Shishka N.V.	219-219
METHOD OF LASER DIAGNOSTICS OF DYNAMIC FORM OF ROTATING OBJECTS Kulikov D.V., Meledin V.G., Dvoynishnikov S.V., Anikin Yu. A., Bakakin G.V., Glavniy V.G., Krotov S.V., Pavlov V.A., Chubov A.S., Pribaturin N.A.	219-220
INTERACTIVE TECHNOLOGIES OF TEACHING FOREIGN LANGUAGE IN THE TRAINING OF TECHNICAL SPECIALISTS FOR EFFECTIVE WORK IN OPEN PRODUCTION SYSTEMS Kulitova N.D., Lovygina M.B.	220-220
COMMON INFORMATION MODEL INTEGRATED INFORMATION SYSTEMS COMPANY Kulga К.S.	220-221
EXPERT CHARACTERISTIC OF THE HIGHWAY IN ROAD AND TRANSPORT EXAMINATION Kurakina E.V.	221-221
SYSTEM APPROACH TO THE CONSTRUCTION OF AUTOMATED MELTING GLASS CONTROL PROCESS Kuranov S.V., Ivaschenko V.A.	221-222
INVESTIGATION OF A MODIFIED OF HEATERS UNDER THE INFLUENCE OF OIL Kurenova I.V., Cherunova I.V., Merkulova A.V., Bahvalov Y.A., Stefanova E.B., Stenkina M.P., Kolesnik S.A., Sirota E.N., Milutina G.R.	222-222
ENVIRONMENTAL PROBLEMS IN THE EXTRACTION OF NONMETALLIC BUILDING MATERIALS IN RUSSIA Kurchin G.S., Volkov E.P., Zaytseva E.V., Kirsanov A.K.	223-223
ON THE BEST CONFIGURATION ROOM-AND-PILLARS FOR ENVIRONMENTALLY SAFE MINING TECHNOLOGY NONMETALLIC BUILDING MATERIALS Kurchin G.S., Volkov E.P., Zaytseva E.V., Kirsanov A.K.	223-223
DEVELOPMENT OF GEOMETRICAL MODELS OF TRANSPORT NETWORKS FOR CARGO HANDLING AND TRANSPORT-WARE-HOUSE WORKS Kuspekov K.A.	224-224
DYNAMIC BEHAVIOR ANALYSIS OF A LOW-PRESSURE TURBINE WHEEL OF AN AIRCRAFT ENGINE Kukhtinskiy A.E., Limonova V.M., Maksimov P.V.	224-225
MIXED FINITE ELEMENT METHOD IN THREE-DIMENSIONAL PROBLEMS OF THE THEORY OF ELASTICITY Lavygin D.S.	225-225
THE STUDY OF LONGITUDINAL DYNAMICS OF THE CHAIN CONVEYOR BELTS Lazutkina N.A.	225-226
ACTIVE FORMS OF ENERGY IN MECHANICAL ENGINEERING Lazutkina N.A.	226-226
ON THE ISSUE OF DISCONTINUOUS CHIP FORMATION Lasukov А.А., Smirnov Y.V.	226-227
DESIGNING DISTRIBUTED RETRANSMISSION SYSTEM WITH THE MOBILE CLIENTS BASED ON CROSS-PLATFORM SOFTWARE DEVELOPMENT METHODS Lebedev A.S., Bolshakov O.S., Petrov A.V.	227-227
TECHNICAL CONDITION OF ELECTRIC NETWORKS OF RUSSIA AND PROSPECT OF THEIR DEVELOPMENT Lebedeva J.V., Shevchenko N. J., Bahtiarov К.N.	227-228
FEATURES OF STRESS - STRAIN OF GLUED BEAMS, REINFORCED WITH FIBERS OF SINTHETIC MATERIALS Lewinski Y.B., Petriaev N.E.	228-228
RECOMMENDATIONS ON HEAT CONTROL METHODS OF JOINTS PRODUCED DURING FRICTION STIR WELDING Levihina A.V., Levihina A.V., Rudenskiy G.E., Rudenskiy G.E.	228-229
METHODS OF INCREASE OF ENERGYEFFICIENT ACTIVITIES OF ENGINES WITH AN EXTERNAL SUPPLY HEAT, WORKINGIN AUTONOMOUSENERGY SUPPLY PLANT Lezhnev L.Y., Ivanov D.A.	229-229
MATHEMATICAL MODELING COMBUSTION PROCESS OF THE MOBILE (ONBOARD) CHARGER’S ENGINE FOR ELECTRIC CITY TRANSPORT Lezhnev L.Y., Khripach N.А., Shustrov F.A., Ivanov D.A., Nazarov V.Е.	229-230
THE DEVELOPMENT METHODOLOGY OF ENERGY EFFICIENT FUEL SYSTEMS OF GAS INDUSTRY ENTERPRISES Lenkova A.V.	230-230
METHODS OF QUERY OPTIMIZATION IN CLOUD DATABASES Leonov D.V.	231-231
EFFECT OF STABILIZING DEVICES ON PRESSURE PULSATIONS IN CONICAL DIFFUSER OF A DRAFT TUBE MODEL Litvinov I.V., Skripkin S.G., Shtork S.I.	231-231
LINEAR PREDICTION OF SPEECH IN SOFTWARE MODEL OF LOW SPEED VOCODER OVER HYDROACOUSTIC COMMUNICATION CHANNEL Litvintseva A.V., Obolonin M.A.	232-232
INVESTIGATION OF ELASTOMER MATERIALS WITH MICRODISPERSED WASTES OF SILICON CARBIDE Liphanov V.S., Kablov V.F., Lapin S.V., Kochetkov V.G., Novopoltseva O.M.	232-233
MODELLING THE VECTOR REGULATION OF THE ASYNCHRONOUS ELECTRIC MOTOR Lihodedov A.D., PortnyaginN.N.	233-233
DEVELOPMENT OF MATHEMATICAL MODEL OF MEMBRANE CONCENTRATION PROCESS BASED ON INFORMATION MODELING METHODS Lobasenko B.A., Shushpannikov A.S., Kotlyarov R.V.	233-234
THE INFLUENCE FACTORS ON RESOURCE USE IN THE CONSTRUCTION OF FOREST ROADS Logachev V.N.	234-234
PROBABILISTIC AND STATISTICAL MODEL TO PREDICT THE UNIT COST OF PRODUCTION RESOURCES Logachev V.N.	234-235
COMPARISON OF NUMERICAL AND ANALYTICAL METHODS CALCULATION OF CHARACTERISTICS SUPPORT BEARING WITH EXTERNAL PRESSURIZATION GAS Loginov V.N., Kosmynin A.V., Shyrokova Z.V., Medvedovskaya Y.V.	235-235
METHOD OF FEASIBILITY STUDY OPTIONS FOR THE MODERNIZATION OF THE PARTS GROUND BASED COMPLEXES Logunov A.V.	235-236
EFFECTOF PRE-COOLINGCOALON THE DEVELOPMENTOFAUTO-IGNITION Lugovtcova N.Y., Portola V.A.	236-236
OPERATION MODES OF THE SYNCHRONOUS GENERATOR OF INVERTER DIESEL POWER STATION Lukutin B.V., Shandarova E.B.	237-237
WAYS OF DECREASE IN FUEL CONSUMPTION OF DIESEL POWER STATION Lukutin B.V., Shandarova E.B.	237-238
ESTIMATION OF RESIDUAL RESOURCE TANK IN CASE OF LOW-CYCLE LOADING Lukyantsev M.A., Vildanov R.G., Iskhakov R.R.	238-238
OPTIMIZATION OF DRY FRICTION NONLINEAR VIBRODIAGNOSTICS PROCEDURES IN DYNAMIC SYSTEM BY CRITERIA OF ACCURACY AND SENSITIVITY Lushnikov B.V.	238-239
PARAMETERS VIBRODIAGNOSTICS OF DRY UNCOLOUMB FRICTION IN SELF-EXCITED FRICTIONAL OSCILLATIONS Lushnikov B.V.	239-239
MORPHOLOGICAL ANALYSIS OF STRUCTURE OF STEAMERS OF SEMI-FLUID FORAGE Lushnov M.A.	239-240
USE CAD FOR A SUBSTANTIATION CONSTRUCTIVE AND STRENGTH PARAMETERS OF TILLAGE IMPLEMENTS Lysych M.N., Shabanov M.L., Zakharov P.V.	240-240
RESEARCH OF POSSIBILITY OF INCREASE TRIBOLOGICHESKIKH OF CHARACTERISTICS OF KNOTS OF FRICTION OF CENTRIFUGAL PUMPS DRAWING THE COMPOSITE COVERING BY THE FRICTIONAL AND CHEMICAL WAY Lyubimova A.S., Korneev A.A., Sokolova E.I., Cherunova I.V., Merkulova A.V.	240-241
STEP-UP HYDRODYNAMIC TRANSMISSION DESIGN Lyamasov A.K.	241-241
MOTION SIMULATION ON THE ROCKS SIFT THE SURFACE OF THE ACTIVE SCREENING UNITS Lyptsev S.A., Glukhikh I.A., Volkov E.B.	241-242

Scientific journal
Scientific Review. Technical science

ISSN 2500-0799

ПИ №ФС77-57440

Scientific Review. Technical science
Scientific journal | ISSN 2500-0799 | CertJournal